|
|
|
|
| 1,2,4 E1 to ETH Protocol Converter |
|
|
| Model No.︰ | - |
| Brand Name︰ | optostar |
| Country of Origin︰ | China |
| Unit Price︰ | - |
| Minimum Order︰ | 5 pc |
|
|
|
|
|
|
u Features:
- Fully compatible with IEEE802.3, ITU-T G703, G704 and G823
- Support 10Base-T, 100Base-TX protocol
- Support VLAN & IEEE802.1q packets
- Enable any group of CH1-CH4 E1 channel to transmit the data at will
- Extend the bandwidth to 7.68Mbps when using 4E1 channels
- Support auto-inspection of effective E1 channel without interruption of data transfer.
- Automatically cut off the E1Channel when it has LOS and AIS alarm, and inform the remote end simultaneously
- Support remote E1 Loop function
- 75/120 ohm Optional of E1 channel impedance
- Internal power supply, overall power consumption<3w, AC160V-260V or DC -48V optional
|
|
|
OP-4E1-ETH can convert 1-4E1 to 10Base-T Ethernet, and vice versa. This protocol converter could support 1-4E1 to Ethernet, which extend the bandwidth to 7.68Mbps. It is widely used in two LAN connecting, remotemonitor and video broadcasting.
|
| |
|
u Ordering Information:
|
Model No
|
Detailed Descriptions
|
|
OP-E1-ETH
|
Convert E1 Signal to 10/100Base-TX
|
|
OP-E1-4ETH
|
Convert E1 Signal to 4 10/100Base-TX
|
|
OP-4E1-ETH
|
Convert 4 E1 Signal to 10/100Base-TX
|
|
OP-8E1-ETH
|
Convert 8 E1 Signal to 10/100Base-TX
|
|
OP-16E1-ETH
|
Convert 16E1 Signal to 10/100Base-TX
|
|
OP-FE1-ETH+V.35
|
Convert FE1 Signal to 10/100Base-TX and V.35 Signal
|
|
OP-FE1-ETH
|
Convert Frame E1 Signal to 10/100Base-TX
|
|
OP-FE1-4ETH
|
Convert Frame E1 Signal to 4 10/100Base-TX
|
|
OP-4FE1-ETH
|
Convert Frame 4 E1 Signal to 10/100Base-TX
|
|
OP-8FE1-ETH
|
Convert Frame 8 E1 Signal to 10/100Base-TX
|
|
OP-16FE1-ETH
|
Convert Frame16 E1 Signal to 10/100Base-TX
|
|
|
|
|
|
|
|
|
|
|
